AVEDORE ANCH

  • Latitude: 55.5517
  • Longitude: 12.4636
  • Baltic Sea
  • Anchorage in Denmark

Address: Denmark

Marine Port Description and Specification: Avedøre Anchorage (AVEDORE ANCH), Denmark

General Overview:

  • Location: Avedøre Anchorage is situated near the port of Copenhagen, Denmark. It is typically used as a holding area for vessels waiting to enter the main port.
  • Coordinates: The anchorage is generally located at approximately 55° 36.5' N latitude and 12° 30.0' E longitude.

Water Depths and Tidal Ranges:

  • Depth: The anchorage area accommodates vessels with varying drafts, typically offering depths ranging from 10 to 15 meters.
  • Tides: The Baltic Sea does not have significant tidal variations, so tidal range here is usually minimal, often around 0.3 to 0.5 meters.

Navigational Information:

  • Charts: Nautical chart numbers relevant to the area should be consulted for up-to-date and detailed navigational information. Typically, this could include charts from national hydrographic offices or from international map providers.
  • Buoyage: The anchorage area is marked and should be navigated using standard International Association of Lighthouse Authorities (IALA) buoyage system.
  • Traffic: Vessels may encounter medium to high traffic due to the proximity to the major port of Copenhagen. Safe anchoring and adherence to navigational rules are crucial.

Facilities and Services:

  • Pilotage: Pilot services can be arranged, typically mandatory for larger vessels entering Copenhagen port through nearby channel areas.
  • Tug Assistance: While primarily a holding area, tug services are available if needed.
  • Communication: VHF channels for maritime communication are used to coordinate movements and ensure safety. Channels typically used are VHF 16 (distress and calling) and appropriate port working channels.

Environmental Conditions:

  • Weather: Weather conditions can vary significantly. Mariners should obtain up-to-date meteorological forecasts before and during their stay.
  • Ice Conditions: Generally, the area is free of ice year-round, but ice may occasionally be an issue during harsh winters.

Regulations and Guidelines:

  • Anchorage Reporting: Vessels must report to local authorities upon arrival and departure from the anchorage.
  • Environmental Regulations: Compliance with local and international marine environmental regulations is mandatory, including waste management and discharge policies.

Safety and Security:

  • Emergency Procedures: Emergency protocols must be in place, and vessels should be aware of local emergency contact numbers and procedures.
  • Security Levels: ISPS code compliance is generally required to ensure the security and safety of operations in and around the anchorage area.

Additional Information:

  • Proximity to Services: The anchorage is relatively near Copenhagen, which offers extensive marine services, provisions, and crew change facilities.
  • Customs and Immigration: Procedures are handled according to Danish national regulations, and vessels must plan for necessary documentation and possible inspections.

Conclusion: Avedøre Anchorage serves as a strategic holding area before vessels enter Copenhagen Port. Mariners should prepare for anchoring by consulting relevant navigational materials, complying with local regulations, and maintaining safety and communication protocols.

Please note that this information can be subject to change; always refer to updated navigational charts and local notices to mariners for the most current information.

Vessels in the port

Flag Name Type Destination Date/Time
LAPIS Dredging KOEGE BUGT 01:55:02
MHV 911 BOPA Military UNKNOWN 9/18/2024
ARGONAUT Dredging AVEDOERE 9/17/2024
SIA Sailing 9/14/2024
ESTRELLA Pleasure 9/14/2024
STAARSHIP II Sailing 9/12/2024
THULA Sailing 9/2/2024
MAPAWLOU Pleasure 9/1/2024
MIAN Pleasure 9/1/2024
4ESSER Sailing 9/1/2024
GEFION Pleasure 8/31/2024
GUYANNE Sailing 8/27/2024
ELYSIUM Pleasure 8/26/2024
BLUE DREAM Pleasure 8/25/2024
VICTORY Pleasure 8/24/2024

Related Ports

Accept Reject