HALDEN ANCH

• Latitude: 59.0882
• Longitude: 11.1676
• Norwegian Coast
• Anchorage in Norway

Location: Halden Viken 1767 Norway

Web-site: https://www.portofhalden.no/

Halden Anchorages, often referred to as HALDEN ANCH, are maritime anchorage areas located in the proximity of the town of Halden in Norway. These areas provide ships with a suitable place to anchor while either awaiting berthing instructions, undergoing inspections, or simply waiting out adverse weather conditions. Below is a detailed description and specifications of HALDEN ANCH:

Port Overview

• Location: Near Halden, a town in Østfold county, southern Norway.
• Coordinates: Approximately around 59°07'N, 11°22'E.
• Accessibility: Accessible via the Oslofjord and Iddefjord, nestled at the end of a fjord leading to the Skagerrak Strait.
• Nearby Ports: Sarpsborg, Fredrikstad, Moss, and Oslo.

Anchorage Specifications

1. Anchor Depths:

   • Varies significantly depending on the specific location within the anchorage area. Depths typically range between 10 to 30 meters. Some deeper spots can be found, suitable for larger vessels.

2. Bottom Type:

   • Predominantly soft mud and sand, conducive to good holding ground for anchors.

3. Navigational Aids:

   • Halden Port is equipped with standard navigational aids including buoys, beacons, and lighthouses to assist in safe maneuvering into anchorage spots.

4. Anchor Position:

   • Positions within Halden Anchorage are generally decided based on vessel size and draft. Precise coordinates and spots are usually assigned by the port authorities to optimize spacing and safety.

Port Facilities & Services

• Pilotage: Compulsory for large vessels entering the fjord and navigating to the anchorage or berths.
• Tug Assistance: Available if required, though many vessels can anchor without tug support due to the sheltered nature of the fjord.
• Supplies and Bunkering: Limited services for supplies and bunkering, primarily facilitated through coordination with nearby larger ports like Fredrikstad or Oslo.
• Waste Disposal: Arranged through port authorities, with strict adherence to Norwegian environmental regulations.

Weather and Sea Conditions

• Prevailing Conditions: The area usually experiences mild maritime weather conditions, although it can be subject to sudden changes, especially during storm seasons.
• Shelter: The anchorage provides good shelter from predominant winds due to its fjord geography, which reduces wave action significantly.

Port of Halden (Proximity)

• Usage: Halden Port is used primarily for commercial vessels, including bulk carriers, general cargo ships, and smaller container ships.
• Facilities: Limited quayside infrastructure but equipped for essential loading and offloading cargo operations.

Other Information

• Environmental Regulation: Strict compliance with Norwegian environmental laws is mandatory. Discharge of any pollutants is strictly prohibited.
• Security: Standard port security measures in place, including monitoring by Norwegian coastal authorities.

Key Points

• Planning and Coordination: Vessels are advised to coordinate with Halden Port Control well in advance to secure anchorage and facilitate any required services.
• Communication: Standard marine VHF channels are used for communications with port authorities and pilot services.

This comprehensive overview should provide a clear understanding of the Halden Anchorage in Norway, including its location, amenities, and operational conditions, which are essential for planning a safe and efficient anchorage.