VINDO A B

• Latitude: 58.2944
• Longitude: 11.7022
• Baltic Sea
• Marina in Sweden

Location: Sweden

The Vindö series, including models like the Vindö 30 and its variants such as A, B, C, and D, are classic sailing yachts produced by the Swedish boatyard Nötesunds Varv AB, located on the island of Orust in Sweden. These boats are known for their high-quality build, classic design, and excellent sailing performance.

General Description:

The Vindö 30 series yachts are recognized for their beautiful teak or mahogany house and the traditional Scandinavian design. They range significantly in layout and fit between the different models (A, B, C, and D), but all share the hallmark of solid craftsmanship and seaworthiness.

Vindö 30 B Specifications:

Here is a more detailed outline for a typical Vindö 30 B:

• Length Overall (LOA): Approximately 9.02 meters (29.6 feet)
• Length at the Waterline (LWL): Approximately 7.0 meters (23.0 feet)
• Beam: Around 2.65 meters (8.7 feet)
• Draft: Typically 1.45 meters (4.76 feet)
• Displacement: Roughly 4,300 kilograms (9,480 pounds)
• Ballast: Around 2,000 kilograms (4,410 pounds)

Hull and Deck:

• Hull Material: Usually, they have a GRP (glass-reinforced plastic) hull with wooden finishing. The deck often features teak.
• Deck Layout: Traditional with a spacious cockpit, functional for both cruising and occasional club racing.
• Keel Type: Full keel or fin keel options depending on the submodel and buyer’s preference.

Rig and Sails:

• Rig Type: Masthead sloop is most common, though other configurations have been seen.
• Sail Area: Around 40 m² (430 ft²) of sail area. This includes the mainsail and headsail, but exact specifications can vary.
• Mast Material: Often aluminum with stainless steel standing rigging.

Engine:

• Engine: Typically fitted with a reliable inboard diesel engine, often from Volvo Penta.
• Power Output: Generally around 20-30 HP, providing enough power for maneuvering and steady cruising.

Interior:

• Berths: Accommodation for 4-6 people typically found with a forward V-berth, settee berths in the main cabin, and sometimes pilot berths on either side.
• Galley: Fully equipped with a stove, sink, and storage.
• Heads: Marine toilet with holding tank, often in a separate head compartment.
• Finish: High-quality woodwork in mahogany or teak, giving a warm and traditional feel to the cabin.

Navigation and Instruments:

• Instrumentation: Typically includes standard navigation aids like a compass, depth sounder, VHF radio, and sometimes GPS or chartplotter as installed by the owner.
• Steering: Usually with a tiller or wheel, depending on the owner's preference.

Additional Features:

• Storage: Ample storage space both below the cockpit and in various lockers throughout the boat.
• Safety: Designed for heavy-weather sailing typical of the North Sea, often equipped with the necessary safety gear for bluewater cruising.

As each Vindö 30 B yacht can be custom-finished to an extent, owners might have specific variations in equipment and finish, so it's always good to check the exact details for a specific boat on sale. This specification provides a general viewpoint common to the Vindö 30 B series.